Emm-labs PRE2-SE User Manual download pdf (Page 11)

011

Operational Features

PRE2 STEREO PREAMPLIFIER OWNER’S MANUAL

Main Screen

1. Mute Button

Pressing the mute button initiates a 2-stage, sequential Mute

function. So Mute (-20dB from the current level), Full Mute,

and nally Mute O. Mute is O/disabled as soon as the

Volume knob is rotated or the Volume buttons are depressed

on the remote. Once Mute is o the PRE2 will return the

signal path to its current volume setting. A short fade-in is

performed to avoid audible transient artifacts.

2. Loop Button

e Loop function allows for the insertion of an external

device (e.g. signal processor) into the main signal path. ere is no gain applied to loop return signal. e state of Loop path

is input-dependent. Each preamp input can engage the Loop as required.

3. PGM Button

e PGM (program) opens a pop-up menu with 4 main programming or conguration selections. New navigation buttons

will appear: Up, Down, Enter, and Exit. See “Programming Menu” section.

4. SAVE Button

e SAVE function immediately saves the state of the system in non-volatile memory. e following parameters are saved:

• Volume Step Number and Loop state - as set for each input

• Volume Display Units (steps or decibels)

• Volume Font: 7-Segment or a ‘Designer’ font

• LCD display Contrast and Brightness settings

• e default input to be selected upon power-up.

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 24 25

No comments

Emm-labs PRE2-SE User Manual Page 11